Mercurial > ldparts / changelog

commit work on 53545 default tip

• Sat, 06 Jan 2018 17:38:00 +0200
• by Santeri Piippo [Sat, 06 Jan 2018 17:38:00 +0200] rev 63
• commit work on 53545

Fixed headers

• Fri, 05 Jan 2018 12:23:04 +0200
• by Santeri Piippo [Fri, 05 Jan 2018 12:23:04 +0200] rev 62
• Fixed headers

round springs to 3 decimal places to further reduce file size

• Fri, 05 Jan 2018 12:08:33 +0200
• by Santeri Piippo [Fri, 05 Jan 2018 12:08:33 +0200] rev 61
• round springs to 3 decimal places to further reduce file size

apply rounding to spring to reduce file size

• Fri, 05 Jan 2018 12:06:50 +0200
• by Santeri Piippo [Fri, 05 Jan 2018 12:06:50 +0200] rev 60
• apply rounding to spring to reduce file size

62233c01: add [135] to part title

• Fri, 05 Jan 2018 12:04:59 +0200
• by Santeri Piippo [Fri, 05 Jan 2018 12:04:59 +0200] rev 59
• 62233c01: add [135] to part title

Spring has been assigned an u-number by library admin

• Fri, 05 Jan 2018 12:04:47 +0200
• by Santeri Piippo [Fri, 05 Jan 2018 12:04:47 +0200] rev 58
• Spring has been assigned an u-number by library admin

54535: commit work done

• Thu, 04 Jan 2018 16:50:50 +0200
• by Santeri Piippo [Thu, 04 Jan 2018 16:50:50 +0200] rev 57
• 54535: commit work done

53545: stuff

• Thu, 04 Jan 2018 15:39:48 +0200
• by Santeri Piippo [Thu, 04 Jan 2018 15:39:48 +0200] rev 56
• 53545: stuff

begin 53545

• Thu, 04 Jan 2018 14:53:39 +0200
• by Santeri Piippo [Thu, 04 Jan 2018 14:53:39 +0200] rev 55
• begin 53545

Changed angle of the trigger in the contracted shortcut

• Wed, 03 Jan 2018 22:18:23 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 22:18:23 +0200] rev 54
• Changed angle of the trigger in the contracted shortcut

changed title of 62233c01

• Wed, 03 Jan 2018 22:13:50 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 22:13:50 +0200] rev 53
• changed title of 62233c01

62233: fix titles and coefficient rounding

• Wed, 03 Jan 2018 19:59:52 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 19:59:52 +0200] rev 52
• 62233: fix titles and coefficient rounding

Midak Skyblaster complete!!

• Wed, 03 Jan 2018 19:52:54 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 19:52:54 +0200] rev 51
• Midak Skyblaster complete!!

modeled 62114 from start to finish

• Wed, 03 Jan 2018 18:51:59 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 18:51:59 +0200] rev 50
• modeled 62114 from start to finish

60931: completed and released

• Wed, 03 Jan 2018 18:04:13 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 18:04:13 +0200] rev 49
• 60931: completed and released
  60932: fixed problems, modified to match 60931 better and resubmitted

60931: shape pretty much finished

• Wed, 03 Jan 2018 17:24:21 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 17:24:21 +0200] rev 48
• 60931: shape pretty much finished

60931: cut

• Wed, 03 Jan 2018 14:49:18 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 14:49:18 +0200] rev 47
• 60931: cut

60931: fix cutting

• Wed, 03 Jan 2018 14:13:26 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 14:13:26 +0200] rev 46
• 60931: fix cutting

60931: add stuff

• Wed, 03 Jan 2018 13:43:31 +0200
• by Santeri Piippo [Wed, 03 Jan 2018 13:43:31 +0200] rev 45
• 60931: add stuff

Begin 60931

• Tue, 02 Jan 2018 21:07:52 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 21:07:52 +0200] rev 44
• Begin 60931

60932: released!!!

• Tue, 02 Jan 2018 15:17:55 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 15:17:55 +0200] rev 43
• 60932: released!!!

60932: complete!!!!!

• Tue, 02 Jan 2018 14:51:40 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 14:51:40 +0200] rev 42
• 60932: complete!!!!!

60932: rework...

• Tue, 02 Jan 2018 14:39:18 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 14:39:18 +0200] rev 41
• 60932: rework...

60932: make some edges conditional

• Tue, 02 Jan 2018 14:25:21 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 14:25:21 +0200] rev 40
• 60932: make some edges conditional

60932: fix front weirdness

• Tue, 02 Jan 2018 14:19:10 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 14:19:10 +0200] rev 39
• 60932: fix front weirdness

60932: fix protrusion

• Tue, 02 Jan 2018 13:59:18 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 13:59:18 +0200] rev 38
• 60932: fix protrusion

rename 7-16rin8.dat -> 7-16ring8.dat

• Tue, 02 Jan 2018 13:15:57 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 13:15:57 +0200] rev 37
• rename 7-16rin8.dat -> 7-16ring8.dat

removed triangle.dat

• Tue, 02 Jan 2018 02:29:24 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 02:29:24 +0200] rev 36
• removed triangle.dat

60932: vent holes ready

• Tue, 02 Jan 2018 02:28:23 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 02:28:23 +0200] rev 35
• 60932: vent holes ready

60932: work on vent holes

• Tue, 02 Jan 2018 00:07:55 +0200
• by Santeri Piippo [Tue, 02 Jan 2018 00:07:55 +0200] rev 34
• 60932: work on vent holes

60932: prepare for cut

• Mon, 01 Jan 2018 20:50:23 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 20:50:23 +0200] rev 33
• 60932: prepare for cut

60932: support thickness

• Mon, 01 Jan 2018 20:43:26 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 20:43:26 +0200] rev 32
• 60932: support thickness

60932: interior tube

• Mon, 01 Jan 2018 19:05:15 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 19:05:15 +0200] rev 31
• 60932: interior tube

60932: add conditional lines

• Mon, 01 Jan 2018 17:24:21 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 17:24:21 +0200] rev 30
• 60932: add conditional lines

60932: front surfaces

• Mon, 01 Jan 2018 17:17:18 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 17:17:18 +0200] rev 29
• 60932: front surfaces

60932: fix title

• Mon, 01 Jan 2018 07:00:49 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 07:00:49 +0200] rev 28
• 60932: fix title

60932: work on the business end

• Mon, 01 Jan 2018 01:47:04 +0200
• by Santeri Piippo [Mon, 01 Jan 2018 01:47:04 +0200] rev 27
• 60932: work on the business end

60932: interior spanning z=-49…0 complete sans details

• Sun, 31 Dec 2017 21:04:59 +0200
• by Santeri Piippo [Sun, 31 Dec 2017 21:04:59 +0200] rev 26
• 60932: interior spanning z=-49…0 complete sans details

60932: interior details, top axlehole complete

• Sun, 31 Dec 2017 20:35:13 +0200
• by Santeri Piippo [Sun, 31 Dec 2017 20:35:13 +0200] rev 25
• 60932: interior details, top axlehole complete

60932: work on interior

• Sat, 30 Dec 2017 23:21:21 +0200
• by Santeri Piippo [Sat, 30 Dec 2017 23:21:21 +0200] rev 24
• 60932: work on interior

60932: defined interior geometry

• Sat, 30 Dec 2017 18:23:14 +0200
• by Santeri Piippo [Sat, 30 Dec 2017 18:23:14 +0200] rev 23
• 60932: defined interior geometry

60932: work on top axlehole

• Sat, 30 Dec 2017 14:15:51 +0200
• by Santeri Piippo [Sat, 30 Dec 2017 14:15:51 +0200] rev 22
• 60932: work on top axlehole

60932: interior work

• Sat, 30 Dec 2017 13:00:31 +0200
• by Santeri Piippo [Sat, 30 Dec 2017 13:00:31 +0200] rev 21
• 60932: interior work

work on interior

• Fri, 29 Dec 2017 22:25:43 +0200
• by Santeri Piippo [Fri, 29 Dec 2017 22:25:43 +0200] rev 20
• work on interior

60932: reorder + work on bottom structure

• Fri, 29 Dec 2017 17:23:43 +0200
• by Santeri Piippo [Fri, 29 Dec 2017 17:23:43 +0200] rev 19
• 60932: reorder + work on bottom structure

60932: bottom cylinder cutouts

• Fri, 29 Dec 2017 14:22:35 +0200
• by Santeri Piippo [Fri, 29 Dec 2017 14:22:35 +0200] rev 18
• 60932: bottom cylinder cutouts

60932: work on the bottom arm

• Fri, 29 Dec 2017 12:56:24 +0200
• by Santeri Piippo [Fri, 29 Dec 2017 12:56:24 +0200] rev 17
• 60932: work on the bottom arm

60922: fixed y-dimensions

• Fri, 29 Dec 2017 11:06:51 +0200
• by Santeri Piippo [Fri, 29 Dec 2017 11:06:51 +0200] rev 16
• 60922: fixed y-dimensions

renamed misc/ to shape-archive/

• Thu, 28 Dec 2017 23:13:11 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 23:13:11 +0200] rev 15
• renamed misc/ to shape-archive/

60932: added bottom axlehole geometry

• Thu, 28 Dec 2017 22:51:14 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 22:51:14 +0200] rev 14
• 60932: added bottom axlehole geometry

60932: fix bottom arm being 2ldu too short (argh!!)

• Thu, 28 Dec 2017 19:49:19 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 19:49:19 +0200] rev 13
• 60932: fix bottom arm being 2ldu too short (argh!!)

60932: work on bottom arm. added shortcut 62233

• Thu, 28 Dec 2017 19:07:02 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 19:07:02 +0200] rev 12
• 60932: work on bottom arm. added shortcut 62233

60932: side cylinder cut

• Thu, 28 Dec 2017 15:22:13 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 15:22:13 +0200] rev 11
• 60932: side cylinder cut

60932: work on top axlehole area

• Thu, 28 Dec 2017 14:53:07 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 14:53:07 +0200] rev 10
• 60932: work on top axlehole area

60922: fix line height

• Thu, 28 Dec 2017 14:52:52 +0200
• by Santeri Piippo [Thu, 28 Dec 2017 14:52:52 +0200] rev 9
• 60922: fix line height

Renumber z001 to 60922, number courtsey of Joshua Delahunty

• Wed, 27 Dec 2017 19:36:41 +0200
• by Santeri Piippo [Wed, 27 Dec 2017 19:36:41 +0200] rev 8
• Renumber z001 to 60922, number courtsey of Joshua Delahunty

Add changes from last night

• Wed, 27 Dec 2017 19:30:13 +0200
• by Santeri Piippo [Wed, 27 Dec 2017 19:30:13 +0200] rev 7
• Add changes from last night

Add misc files

• Wed, 27 Dec 2017 00:03:30 +0200
• by Santeri Piippo [Wed, 27 Dec 2017 00:03:30 +0200] rev 6
• Add misc files

60932: fixed prongs bending too much

• Wed, 27 Dec 2017 00:02:45 +0200
• by Santeri Piippo [Wed, 27 Dec 2017 00:02:45 +0200] rev 5
• 60932: fixed prongs bending too much

Work on 60932

• Tue, 26 Dec 2017 23:14:29 +0200
• by Santeri Piippo [Tue, 26 Dec 2017 23:14:29 +0200] rev 4
• Work on 60932

Begin midak skyblaster

• Tue, 26 Dec 2017 12:34:06 +0200
• by Santeri Piippo [Tue, 26 Dec 2017 12:34:06 +0200] rev 3
• Begin midak skyblaster

44817: added keywords, fixed warped quads

• Sun, 24 Dec 2017 19:32:51 +0200
• by Santeri Piippo [Sun, 24 Dec 2017 19:32:51 +0200] rev 2
• 44817: added keywords, fixed warped quads

44817 complete

• Sun, 24 Dec 2017 13:08:08 +0200
• by Santeri Piippo [Sun, 24 Dec 2017 13:08:08 +0200] rev 1
• 44817 complete

Added 44817.dat

• Sat, 23 Dec 2017 20:12:42 +0200
• by Teemu Piippo <teemu@hecknology.net> [Sat, 23 Dec 2017 20:12:42 +0200] rev 0
• Added 44817.dat